OTDR WizardSign in

Reference · 5 min read

OTDR file viewers compared

Updated

Any software that reads the Bellcore / Telcordia SR-4731 format can open a .sor file, whichever brand of OTDR saved it. There are three kinds of OTDR file viewer: the instrument maker’s own desktop software, open-source readers for programmers, and online viewers that run in a web browser. The right one depends on whether you need the maker’s own analysis, a script, or a quick look at a trace from any device.

The three kinds at a glance

FeatureMaker’s desktop softwareOpen-source readersOnline viewer in the browser
InstallYes, usually WindowsA programming language and a libraryNo
Works on a phoneRarelyNoYes
Opens other brands’ filesUsually, through SR-4731YesYes
The maker’s own analysisYesNoNo
ReportsYes, often per projectWrite your ownYes
Where the file goesStays on your computerStays on your computerDepends on the site

The instrument maker’s software

Every OTDR brand has PC software for its instruments, often with a paid edition for reports and batch work. It is the only tool that understands everything in the brand’s own files: besides the standard blocks, a .sor can carry proprietary blocks with the maker’s analysis settings and extra data, which other software cannot interpret. If you need to re-run the instrument’s event detection, or work with the maker’s project files rather than single .sor files, use this software.

Its limits are practical. It is usually installed on one Windows computer, it may need a licence per seat, and someone without it, such as a client or an office colleague, cannot open the trace you send them.

Open-source readers

For programmers there are libraries that parse SOR files, for example pyOTDR in Python and otdrs in Rust. They turn a file into data you can process: compare hundreds of traces, check a whole project against limits, or feed a database. OTDR Wizard itself is built on otdrs (LGPL-3.0).

They do not draw a usable trace or produce a report on their own; you write that part.

Online viewers

An online SOR viewer opens the file in a web browser, so it works on any computer, tablet or phone without installing anything. This is the quickest way to look at a trace someone sent you, to check a file in the field, or to give a client a way to see their results.

The question to ask is where the file goes. Some sites upload the file to a server to read it. OTDR Wizard does not: the reader is compiled to WebAssembly and runs in your browser tab, so the file is read on your device and never sent anywhere. That matters for client traces and network maps.

What to check in any SOR viewer

  • Your instrument’s files open. Most OTDRs save SR-4731 issue 2, which every viewer reads. Some older instruments save issue 1, which not every viewer supports; OTDR Wizard does not read issue 1 yet.
  • The whole event table is shown, with distance, loss, reflectance, section attenuation and cumulative loss, and the fibre end is clear. The event table guide lists what each column should hold.
  • The test settings are visible: wavelength, pulse width, range, averaging and group index. Without them a trace cannot be judged. See SOR file parameters.
  • Several files at once, with 1310 and 1550 nm traces of the same fibre on one chart, which is how bends are found.
  • Pass/fail against your limits, so a long list of fibres can be checked at a glance. See pass/fail limits.
  • Reports in the format your client asks for: PDF for acceptance, Excel or CSV for records.
  • Privacy: whether the file is uploaded, and what is kept.

What a free online viewer does in OTDR Wizard

Viewing is free and unlimited, with no account: the trace, zoom and A–B markers, the event table, every parameter, pass/fail checks and several files on one chart. Exports to PDF, Excel, CSV or JSON are free for 5 files a month on each device; after that, extra exports or a plan cover them. To start, follow how to open a SOR file, and to make sense of what you see, how to read an OTDR trace.

When you still need the maker’s software

  • To change the instrument’s analysis settings and detect events again from the raw trace.
  • To open the maker’s project or bidirectional files, rather than single .sor traces.
  • When a contract names the maker’s report format.

For viewing, checking and reporting single traces from any brand, a viewer that reads SR-4731 is enough.